Fuzzy Logic Active and Semi-Active Control of Off-Road Vehicle Suspensions

For off-road vehicles, minimizing the absorbed power is the main objective of suspension control. The primary cause of increase in the absorbed power in off-road vehicles driven at high speeds on harsh courses is the exhaustion of the suspension travel. Fuzzy-logic approach to active and semi-active off-road vehicle suspension control, with the goal of improving the speed of the vehicle over rough terrains are developed. The ride metric used for quantifying improvements is the absorbed power of the sprung mass. Particular attention is paid to the proper modeling of the suspension using both the full kinematic constraints and the more convenient two degree of freedom linear model of the quarter vehicle suspension. The nonlinearities due to the kinematic constraints on motion are accounted for by modifying the stiffness and damping coefficients of the suspension spring and dashpot in the linear model. The control laws are developed using the less complex model and demonstrated in the fully constrained environment. Nonlinearities of the suspension, including tire stiffness/damping and bumpstops are included at all stages of controller development.     

An adaptive lateral preview driver model

Successful modelling and simulation of driver behaviour is important for the current industrial thrust of computer-based vehicle development. The main contribution of this paper is the development of an adaptive lateral preview human driver model. This driver model template has a few parameters that can be adjusted to simulate steering actions of human drivers with different driving styles. In other words, this model template can be used in the design process of vehicles and active safety systems to assess their performance under average drivers as well as atypical drivers. We assume that the drivers, regardless of their style, have driven the vehicle long enough to establish an accurate internal model of the vehicle. The proposed driver model is developed using the adaptive predictive control (APC) framework. Three key features are included in the APC framework: use of preview information, internal model identification and weight adjustment to simulate different driving styles. The driver uses predicted vehicle information in a future window to determine the optimal steering action. A tunable parameter is defined to assign relative importance of lateral displacement and yaw error in the cost function to be optimized. The model is tuned to fit three representative drivers obtained from driving simulator data taken from 22 human drivers.     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Risk assessment framework for exposure of cargo and ports to natural hazards and climate extremes

There is an increase in risks and catastrophic losses in maritime transport including ports and cargo. Significant losses have been associated with large scale natural hazards, such as earthquakes, tsunami, cyclones, and other extreme weather events. This paper identifies the main gaps in understanding maritime risks in transportation research. The gaps are attributed to insufficient empirical work available from the maritime transport and logistics research community to guide multi-risk and natural hazards impact assessment on seaport and cargo. In addition, disaster studies communities have barely made adequate efforts to understand and assess port and cargo risks arising from multi-hazards and disaster events. This paper examines existing conceptual frameworks concerning exposure and risk assessments of natural catastrophe’s impacts. Furthermore, the paper identifies trends and gaps in risk assessment frameworks in the field of disaster studies that can be beneficial for maritime risk research. The authors propose a new risk assessment framework that can guide future research and multi-hazard risk assessment processes at different scales of maritime risks.     

The merits of accelerated depreciation for promoting investment in clean transport technologies: A simulation study in the Australian rail freight industry

This article ascertains the viability of promoting accelerated depreciation for newly acquired locomotives and other rolling stock as a means of encouraging technological investment in more efficient and environmentally friendly assets. The study uses a tax-adjusted asset replacement model to evaluate the merits of accelerated depreciation, and then compares the outcomes with alternative incentive schemes. It also examines what would occur if various schemes were used simultaneously.     

Predicting queue variability to enable analysis of overload risk

ABSTRACT

Predicting the risk of traffic demands and delays exceeding critical limits at road junctions, airports, hospitals, etc., requires knowing how both mean and variance of queue size vary over time. Microscopic simulation can explore variability but is computationally demanding and gives only sample results. A computationally efficient approximation to the mean is used in many modelling tools, but only empirical extensions for variance in particular situations have been available. The paper derives theoretical formulae for time-dependent and equilibrium variance, believed to be novel and to apply generally to queues covered by the Pollaczek–Khinchin mean formula, and offering possible structural insights. These are applied in an extended approximation giving mutually consistent mean and variance estimates with improved accuracy. Tests on oversaturated peak demand cases are compared with Markov probabilistic simulation, demonstrating accuracy (R^2?>?0.99) for typical random, priority-like (M/M/1) and traffic-signal-like (M/D/1) queues. Implications for risk analysis, planning and policy are considered.     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

The accuracy of proxy responses in a stated choice setting: A re-examination and some controversial conclusions

Data is typically gathered from an individual respondent who represents the group or the household. This individual is often identified as the “primary decision maker” and is asked to provide responses as a proxy for the group given that the cost of interviewing each member individually is impractical and/or expensive. The collection of joint preferences is rarely undertaken, with the use of proxy responses not uncommon in travel behaviour research. Under such a framework, there exists an assumption that the primary decision maker has perfect knowledge of other group member preferences, and bargaining behaviour, and is able to synthesise this information when providing a response on their behalf. The validity of such an assumption however remains an open question, with recent research calling the reliability of proxy responses into account (Bateman and Munro, 2009). In this paper, using three models estimated in willingness to pay space, we examine the accuracy of proxy responses in a stated choice experiment. We find that there is overlap between a proxy response and the own preferences of the individual providing the proxy choice, but while the proxy responses fail to represent the full preference heterogeneity that exists in the actual choices made by individuals, the proxy responses in aggregate provide a suitable replacement for actual data, subject to a number of caveats.     

Redefining activity types: Who participates in which leisure activity?

This paper analyzes the activity choices of individuals and the links between socio-demographics, daily schedules and activity attributes using a new activity choice framework. Activities are first clustered into groups based on their salient attributes, such as duration, frequency, flexibility, planning times, and number of involved persons, rather than their functional types (work, leisure and household obligations), using a K-means cluster technique. This led to the creation of several new activity groups such as “long, temporally fixed, personally flexible activities”, “short and flexible activities”. These activity groups form the choice set for the mixed logit activity choice modeling structure developed for the leisure activities in the second part of the paper. The model results reveal the significant relationships between socio-demographics, temporal characteristics, and characteristics of the schedules on leisure activity choice. The results demonstrate how changing demographics and other activities in individuals’ schedules may affect the nature of the leisure activities and present the substitution and complimentary effects that these new activity groups have on one another.